Honeywell Wi-Fi 7-Day Programmable Touchscreen Thermostat – RTH8580WF (Pack of 2)

September 18, 2017 - Comment

The Wi-Fi 7-Day Programmable Touchscreen Thermostat is Wi-Fi enabled for remote access from anywhere in the home. Product Features 6″ high / 12″ wide To complete initial set-up, a device with Wi-Fi capabilities and a web browser is required; A compatible 802.11b/g/n wireless router Unit requires C WIRE to work Remotely view and control the

Buy Now! $199.00Amazon.com Price
(as of April 19, 2020 8:17 am EDT - Details)

The Wi-Fi 7-Day Programmable Touchscreen Thermostat is Wi-Fi enabled for remote access from anywhere in the home.

Product Features

  • 6″ high / 12″ wide
  • To complete initial set-up, a device with Wi-Fi capabilities and a web browser is required; A compatible 802.11b/g/n wireless router
  • Unit requires C WIRE to work
  • Remotely view and control the temperature of the home; Alerts high/low temperature, loss of connection to network
  • Real time clock keeps the time during a power failure and automatically updates the time for daylight savings (optional)

Comments

iReview says:

Better Than Nest 2nd Generation This review is a comparison between the Honeywell RTH8580WF thermostat and Nest 2nd Gen thermostat, which I’ve spent considerable time with over the last two months. (Initial review written in January 2013) 

PLE says:

Satisfied with the Thermostat now that firmware has been updated I was getting irritated one day since I had to get up and down to turn off the A/C. Just lazy I guess, but it got me thinking about a WIFI thermostat. Normally I would look to Amazon, but, I got a good deal elsewhere. The only problem is that while I’m satisfied with the Thermostat itself, the Android and Windows 7 apps always turn the FAN ON whenever a command is sent. What a major PITA. The apps do not see that the fan is ON, so, I have to send a FAN ON command, then a FAN AUTO command every…

Heather B. says:

Pretty decent with a few flaws. It took about 4 weeks for the thermostat to learn how to properly heat and cool my house. I made the mistake of replacing my old one in January during a cold snap in the -10*F range and my first bill was over $450 when previously I was sitting in the $150-$200 mark for that type of weather. Eventually the system learned when to be on and off. The one thing I don’t like about it now is that it uses “internet time” and I’m not sure where it’s pulling it from and you can’t user-set it…

Write a comment

*