Features:
This temperature probe can be submersed into beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Plug and play design,easy to use;
Dual relay output,be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load:1100W(110V);
Dual display window,be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;

Specification
Temperature Control Range:-50~99°C/-58~210 °F
Temperature Resolution:0.1°C/0.1°F
Temperature Accuracy:±1°C(-50~70°C)/±1°F(-50~160°F)
Temperature Control Mode:On/Off Control,Heating and Cooling
Input Power:100~240VAC,50Hz/60Hz
Temperature Control Output:Max.10A,100V ~240VAC
Dimension Body:140x68x33mm(5.5×2.7×1.3inch)
Socket:85x42x24mm(3.3×1.7x1inch)
Input Power Cable Length:1.5m(5ft)
Output Power Cable Length:30cm(1ft)
Buzzer Alarm: High and Low Temperature Alarm
Over-temperature and sensor fault alarm
Ambient Temperature:-30~75°C/-22~167°F
Storage Temperature:-20~60°C
Measuring temperature range:-50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions:6mmx300mm(0.24in x 12in)
Cord Length (excluding probe):2m (6.5ft)

Package Content:
1xITC308S temperature controller;
1xStainless Steel Probe DC Sensor
1xManual

Product Features

• 12inch Stainless Probe with 6.5ft DC cord
• Temperature calibration
• Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
• Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
• Support reading with Centigrade or Fahrenheit unit;