Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1000W With 6.65ft DC Cord NTC Stainless Probe Sensor for Aquarium, Incubator ect
Features: Plug and play design, easy to use; Dual relay output, be able to connect with refrigeration and heating equipment at the same time; Support reading with Centigrade or Fahrenheit unit; Maximum output load: 1100W(110V); Dual display window, be able to display measured temperature and set temperature at the same time; Compressor delay protection for
Features:
Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1100W(110V);
Dual display window, be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Over-temperature and sensor fault alarm
Temperature calibration;
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Specification
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
Package Content:
1x ITC 308S Temperature Controller;
1x 6.65ft DC Cord NTC Sensor
1x Manual
Product Features
- F/C degree display; Easy to set, PV and SV dual display windows
- Dual display window, be able to display measured temperature and set temperature at the same time
- The sensor is waterproof and is better for the freshwater tank than the saltwater tank.
- Maximum output load: 1100W(120V); Alarm when over-temperature and sensor error
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
){kind=link}
Why pay 4 times the price This works great at keeping my beer + or – one degree from my set point. I am using a chest freezer for cooling and a FermWrap Heater for heat. This unit has two temperature setting options Fahrenheit and Celsius. It also has an auto cycle delay to keep your from running your freezer or fridge too much. When you first set it up with the auto cycle delay it will wait the amount of time you set before starting the heating or cooling process. The maximum amount of time for the auto delay cycle is…
Works great, keeps you dialed in close for your fermenting! Works great on your glass fermenter, however I took a single star as it would randomly reset itself. This has happened twice now in 5 brews, and always when I was doing lower 70s temps.
Set up with a high velocity fan. Works great so far. I set it up with a high velocity fan as an over-garage attic exhaust fan. Settings setup is fairly straight forward.